2024-05-07
SA 500C4 Introduction
SA 500C4 is a modified plastic that is conductive PVC for extrusion molding. It is a graphene-reinforced plastic with good mechanical properties and electrical conductivity. At the same time, it can also be used as a conductive masterbatch to reduce costs.
Properties &Data Of Injection Molded Specimens
Physical property | Standard | Value | Unit |
Density | GB/T 1033.1-2008 | 1.26-1.33 | g/cm³ |
Hardness | Standard | Value | Unit |
Shore Hardness D | GB/T-2422-2008 | 55 |
|
Mechanical behavior | Standard | Value | Unit |
Tensile Strength 23°C | GB/T-1040.3-2006 | >15 | MPa |
Elongation at break | GB/T-1040.3-2006 | >100 | % |
Electrical Properties | Standard | Value | Unit |
Surface Resistivity
| GBT 1410-2006 | <10E4 | Ohms |
Flammability | Standard | Value | Unit |
Flame Rating |
| V-0 |
|
Process Condition |
| Value | Unit |
Front Barrel Temperature GB/T-1040.3-2006 | 160-170 | °C | |
Middle Barrel Temperature | 165-180 | °C | |
Rear Barrel Temperature | 175-190 | °C | |
Disclaimer: Data herein is typical and not to be construed as specifications. |
SA 500C4 Highlights
SA 500C4 Applications
Conductive PVC extrusion molding grade is a material with excellent conductivity and is suitable for extrusion and injection molding. Extruded conductive PVC can be used in many fields. Here are some examples of applications:
Extruded conductive PVC has a wide range of application scenarios, and the specific application scenarios may vary depending on factors such as performance and cost.