Permanent Antis Static Additives For LDPE HDPE Resin
- ● PE 80 AN is designed for HDPE ,LDPE,LLDPE.
- ● Addition level 10-25 wt% to achieve surface resitivity 10^7-10^11 Ohms/sq.
- ● Typical Properties
- – Melting Point 192°C
- – Melt Flow Rate (200°C,2.16kg ) 15 g/10 min
- – Surface Resistivity( 23°C, 50%R.H) 3.5×10E6 Ohms/sq
- PE 80 AN is one of permanent antistatic additives for HDPE resin . This ESD compound provides antidust/antistatic properties to polymers. Compatible with HDPE and LDPE,It ‘s a non-migrating ,internal added permanent antistatic masterbatch.Recommended to add 10-25%, then surface resistance of final product can reach 10E7-10E11 Ω.
Antistatic additive PE 80 AN typical properties:
- Melting Point
- 170 °C
- Density
- 1.26 g/cm³
- Melt Flow Rate(180°C,2.16kg )
- 14 g/10 min
- Surface Resistivity @ 23°C, 50%R.H
- 2.6×10E6 Ohms/sq
- Tensile Strength
- 7 Mpa
- Shore Hardness HD
- 22
Anti static masterbatch introduction
- INCHR@anti static masterbatch is permanent anti static compound which does not need to compound or pelletize with matrix resins before processing ,just dry blend with matrix and then process.Compatilizer is inherently formulated in anti static masterbatch,low impact on matrix properties.Anti static masterbatch can form discharging layer on the surface of a material, thus reducing its surface resistivity and making the already generated electrostatic charge leak rapidly such as automotive fuel systems, electronic and electrical packaging and 3D printing.
- ●Is immediately functional and imparts long-term antistatic effect.
- ●Exhibits low influence of relative humidity on the antistatic performance.
- ●Is not migrating of the compound.
- ●Can maintain mechanical properties of the polymer.
- ●Extremely effective to provide different performance targets (10E8-10E11 Ohm/sq).
- Even below 10E7 Ohms/sq,can be reached in optimized formulations.
