PC HI700 AN is a ESD concentrate of permanent, internal added antistatic additives for plastic.The surface resistivity of the final product is not humidity dependent.Offers protection against the problems caused by static electricity including destruction of electronic circuits, electric shock, appliance malfunctions and dust adhesion.Suitable for any colour formulation. It can be processed by injection and extrusion . Recommended dosage level is 15-25 %wt.
Antistatic additives for Polycarbonate technical datas:
Melting Point
160 °C
Density
1.24 g/cm³
Melt Flow Rate(200°C,2.16kg )
9.6 g/10 min
Surface Resistivity @ 23°C, 50%R.H
4.5×10E6 Ohms/sq
Tensile Strength
5 Mpa
Shore Hardness HD
19
Antistatic additives for Polycarbonate characteristics:
Is immediately functional and imparts long-term antistatic effect.
Can be processed by injection molding or extrusion.
Used for both anti-dust and preventing electrostatic discharge application.
Very low humidity influence.
No blooming or migration.
Non- toxic.
Antistatic additives packaging and storage instructions:
25kg in a composite bag, Should be stored in a cool, ventilated warehouse, is strictly prohibited in the rain, water immersion.
Store in the original container securely under cool and dry conditions.
All antistatic additives can be stored in its original packaging for at least 24 months without losing its properties.
Use immediately after opening,Keep closed when not in use, in case of that this product absorbs moisture, drying at 85 ºC for 3 h under vacuum is required before use.